Missing parenthesis

 

 

Hi everyone,
I´m having a little problem with my procedure. I want to use a window for calculating a normalization factor for a chosen wave, and then apply this normalization factor to a set of waves, selected in another listbox. I managed to do the first part (SelectNormalizationWave part), but when I use a button for duplicating the waves that I want to normalize(Function B_Continue), I obtain the following message: "expected right parenthesis". I have modify the commands, but I still get the same error. Can somebody help me?. I attach the experiment file in case it is necessary, as well as the procedure itself.

Many thanks.

 

 

 
#pragma rtGlobals=1

Function Panel()
    NewDataFolder/O root:Parameters
    NewDataFolder/O root:Waves
    DFREF Ref=root:Parameters, Refw=root:Waves,Refo=root:Original
    Dowindow/K Normalization_Panel
   
    NewPanel /N=Normalization_Panel /M /W=(15,3,30,12)
       
    SetDataFolder root:Original
    String/G Ref:S_ListOfWaves; SVAR S_ListOfWaves=Ref:S_ListOfWaves
    S_ListOfWaves =WaveList("*",";","")
    Make/T/O/N=(ItemsInList(S_ListOfWaves, ";")) Ref:W_ListOfWaves/WAVE=W_ListOfWaves;
    W_ListOfWaves = StringFromList(p, S_ListOfWaves, ";")
    Make/O/N=(DimSize(Ref:W_ListOfWaves, 0)) Ref:W_WaveSelection/WAVE=W_WaveSelection
    SetDataFolder root:
           
    Variable/G Ref:V_NumberOfWaves;NVAR V_NumberOfWaves=Ref:V_NumberOfWaves
    V_NumberOfWaves= (DimSize(Ref:W_ListOfWaves, 0))   
    SetVariable NumberOfWaves title="NumberOfWaves",noedit=1,size={130,20},bodyWidth=60,pos={320,200},limits={-inf,inf,0}, value=V_NumberOfWaves, win=Normalization_Panel

    TitleBox Range_Tittle pos={100,200},title="Range",frame=1, win=Normalization_Panel
    TitleBox WavesToNormalize pos={380,20}, title="WavesToNormalize", frame=1, win=Normalization_Panel
    TitleBox WaveBase_Tittle pos={100,20},title="WaveBase",frame=1, win=Normalization_Panel
   
    Variable/G Ref:V_RangeInitial; NVAR V_RangeInitial=Ref:V_RangeInitial
    SetVariable Range_From title="\\JLFrom",bodyWidth=60,highColor= (0,0,0), value=V_RangeInitial
    SetVariable Range_From lowColor= (0,0,0),frame=2,font="default"
    SetVariable Range_From pos={50,250}
    SetVariable Range_From bodyWidth=40,limits={-inf,inf,0}

    Variable/G Ref:V_RangeFinal;    NVAR V_RangeFinal=Ref:V_RangeFinal; V_RangeFinal=50
    SetVariable SV_RangeTo title="\\JLTo",bodyWidth=60,highColor= (0,0,0), value=V_RangeFinal
    SetVariable SV_RangeTo lowColor= (0,0,0),frame=2,font="default"
    SetVariable SV_RangeTo pos={150,250}
    SetVariable SV_RangeTo bodyWidth=40, limits={-inf,inf,0}
   
    GroupBox GB_NormSep pos={30,180},size={500,4},frame=0, win=Normalization_Panel

    Variable/G ref:V_NormalizationIntensity; NVAR V_NormalizationIntensity=ref:V_NormalizationIntensity
    SetVariable ST_Intensity pos={400,260}, title="Intensity", bodyWidth=60, limits={-inf,inf,0},win=Normalization_Panel, value=V_NormalizationIntensity,noedit=1
   
    ListBox LB_NormalizationWave pos={90,60}, size={80,80}, listWave=W_ListOfWaves, selWave=W_WaveSelection, mode=1, win=Normalization_Panel, proc=SelectNormalizationWave
    ListBox LB_WavesToNormalize pos={390,60},size={80,80}, listWave=W_ListOfWaves, selWave=W_WaveSelection, mode=4, win=Normalization_Panel, noproc
       
    Button B_Continue pos={150,290}, title="Continue", proc = B_Continue, win=Normalization_Panel
end

Function SelectNormalizationWave(snw)
    STRUCT WMListboxAction &snw
    DFREF Ref=root:Parameters, Refw=root:Waves,Refo=root:Original
       
    if (snw.eventCode == 4) // CellSelection
        NVAR V_RangeInitial=Ref:V_RangeInitial, V_RangeFinal=Ref:V_RangeFinal,V_NormalizationIntensity=ref:V_NormalizationIntensity
        SVAR S_ListOfWaves=Ref:S_ListOfWaves
       
        Variable/G Ref:V_NormalizationRow; NVAR V_NormalizationRow=Ref:V_NormalizationRow
        ControlInfo /W=Normalization_Panel  LB_NormalizationWave
        V_NormalizationRow = V_Value
        String/G Ref:S_NormalizationWave; SVAR S_NormalizationWave=Ref:S_NormalizationWave
        S_NormalizationWave=StringFromList(V_NormalizationRow, S_ListOfWaves , ";")
        Duplicate/O refo:$S_NormalizationWave, refw:W_Normalization/WAVE=W_Normalization
        Make/O/N=(DimSize(W_Normalization, 0)) refw:Normalization/WAVE=Normalization
        Normalization=W_Normalization; Integrate Normalization
       
        V_NormalizationIntensity=(Normalization[DimSize(W_Normalization,0)-V_RangeInitial]-Normalization[DimSize(W_Normalization,0)-V_RangeFinal])/(V_RangeFinal-V_RangeInitial)
    Endif
End

Function B_Continue()
    DFREF Ref=root:Parameters, Refw=root:Waves,Refo=root:Original
    NVAR V_RangeInitial=Ref:V_RangeInitial, V_RangeFinal=Ref:V_RangeFinal
    SVAR S_ListOfWaves=Ref:S_ListOfWaves
    WAVE W_WaveSelection=Ref:W_WaveSelection
    WAVE W_ListOfWaves=Ref:W_ListOfWaves
    Variable/G Ref:V_Point; NVAR V_Point=Ref:V_Point; V_Point=0
    Variable/G Ref:V_Number; NVAR V_Number=Ref:V_Number; V_Number=0
    String/G Ref:S_wave; SVAR S_wave=Ref:S_wave; S_Wave="Ups"
   
    if (W_WaveSelection[V_Point] == 1)
        S_wave=StringFromList(V_Point, S_ListOfWaves)
        Duplicate/O Refo:$S_wave, Refw:$("W_Wave" + num2str(V_Number))
        V_Number +=1; V_Point +=1  
    else
        V_Point+=1
    Endif          
End
ProcedureTest.pxp
I believe your button proc should rather look like this:

Function B_Continue(ctrlName)
     String ctrlName
   
    // your code
end


ChrLie wrote:
I believe your button proc should rather look like this:

Function B_Continue(ctrlName)
     String ctrlName
   
    // your code
end


Yep, that was the problem. I changed that and now it works.
Thank you very much.
A friendly note on this problem...

This illustrates a very common misunderstanding- the form of a control action procedure must be *exactly* as shown in the documentation. That's because when something happens to a control that requires calling your procedure, Igor must put together a call to the action procedure. If you write a procedure with a different format, Igor doesn't know how to fill out the unknown parameters.

You might think that an action proc that simply has no inputs would be OK. I suppose it could be, but it would have to be written in Igor's source as a special case. That adds complexity and complexity adds the chance for bugs, so we avoid it when we don't think the added complexity adds significant additional functionality.

John Weeks
WaveMetrics, Inc.
support@wavemetrics.com